Acumen AiP-Q4U User Manual

Page 42

AiP-N series 16CH/9CH/4CH Manual

If the IP addresses of the installed AiP cameras have not already been configured, they can be changed by

highlighting the channel and entering the new IP address

1.1-9 Camera Disable (Secured Recording Channel)

Channel enable feature can disable the live video of a camera

The channel can still perform video recording

1.1-10 Video Setup

Contrast, brightness, saturation, sharpness, and load default are configurable per camera

Note:

Different HDMI cables can successfully send HDMI signals various distances, depending on the

quality of the HDMI cables design and construction. It is best to test entire systems before installing,

recommended the HDMI cable length is 2 meters.

Recommended using M,