Acumen AiP-T53N - Manual (Page 9)

8
Chapter 2-2 Configure IP Address Using HTML Page
To change IP address using HTML page, please first type the default IP address,
192.168.0.200 in Internet browser and follow steps below:
 Logon H.264 FULL HD AiP camera using default username and
password
—“admin” and “pass”.
 Click on “Configure” hyper link.
 Click on “Network->General” hyper link.
 Type or modify edit box for IP address, subnet mask, gateway, or HTTP
connection port.
 Click on Submit button.
Chapter 2-3 Internet Browser Setting & Software Component Required
Make sure that your Internet Browser allows signed ActiveX plug-in running on
your PC. Set
“Download Signed ActiveX plug-in controls” to “Prompt” and “Run
ActiveX control and plug-
in” to “Enable” at Internet
Explorer->Tools->Options->Security Settings.
After finishing above security settings, accessing H.264 FULL HD AiP camera ’s live
video by default IP address of H.264 FULL HD AiP camera using Internet Explorer
will prompt a Security Warning dialog box. Click on OK button to download the
ActiveX directly from H.264 FULL HD AiP camera.