Acumen AiP-T53N - Manual (Page 31)

30
Chapter 3-8 Alarm Settings
H.264 FULL HD AiP camera
’s hardware alarm system contains motion detection,
alarm sensors, and one alarm/relay output. Many alarm features such as
motion/alarm email notification and FTP archiving can be found at this section.
Chapter 3-8-1 Motion/Alarm Setup
There are motion detection zones allowed in the H.264 FULL HD AiP camera. A
user can enable the detection zones with different sensitivities ranging from 1 to
99 (highest to lowest) for motion detection. Once a suspicious motion activity
gets triggered, H.264 FULL HD AiP camera can start to capture one JPEG
snapshot on various recording mediums.
Chapter 3-8-2 Setup for Camera with Alarm Input

Alarm Notification
—Enable alarm notification.

Alarm Input Mode
—Normal open/normal close for detecting alarm input

Alarm Output Time
—Trigger alarm output based on the dwell.
For video encoder model, since there are two alarm outputs, a user can specify
alarm output time.
Chapter 3-8-3 Motion Area
Once above information get set, please configure the motion area of the
monitored environment. To configure motion area, perform mouse click on the
video area.