Acumen AiP-T53N - Manual (Page 36)

35
Advance Network Port Forwarding Technology
Port forwarding technology is an advanced network technology which is widely
used for using one global IP shared by many network devices. The network
architecture is illustrated as below. Port 80 of the router (192.168.0.10) is
assigned to the device IP address, 192.168.0.10. Port 81 of the router is
assigned to the device IP address, 192.168.0.11. When Remote PC accesses
the router’s port 86 (122.116.191.129), it eventually accesses the video server at
192.168.0.11.
Emergency Factory Default
To restore the server to factory default setting, please:
1. Hold Load Default Button or short Reset Cable for 10 seconds, then
release the button or Reset Cable.
2. After about 40 seconds, the network LED light is off, and then it
becomes lit again.
3. This camera has completed the factory default setting, and it reboots.
4. Use IPScan scanning for the IP address of the IP device.
5. Launch Internet browser for the IP address of the IP device.
6. Type default username
“admin” and password “pass” for enter web
interface of the IP device.
SD Card Compatibility List
Manufacturer Size SDHC/SDSC
Sandisk 16GB SDHC
Sandisk 8GB SDHC
Transcend 8GB SDHC
Transcend 4GB SDHC
Router’s global IP: 122.116.191.129
Port 80: 192.168.0.10
Port 81: 192.168.0.11
http:// 122.116.191.129:86
Internet
IP: 192.168.0.10 IP: 192.168.0.11