Actron PocketScan Plus CP9550 - Manual (Page 6)

6
Connect the Tool
To connect the Tool to the vehicle:
1. Locate the OBDII connector under the steering column.
If the connector is not there, a label should be there indicating
the whereabouts of the connector.
2. If necessary, remove the cover from the vehicle connector.
3. Turn the ignition switch to the ON position. Do not start the
engine.
4. Plug the OBD II Connector attached to the Tool into the vehicle
connector.
The Tool automatically reads ALL
the data from the vehicle then displays
the Main Menu.
View Codes/Data Types
To view the codes or data types:
1. From the Main Menu, press the 
READ or ERASE arrow key
until the desired code or data type (Codes, MIL Status, I/M
Monitors, Freeze Frame, or VIN) is visible, then press the
ENTER key to display the results for that data type:
2. Press  READ or ERASE to scroll through the codes and data.
3. Press ENTER to return to the Main Menu selection screen.
Main Menu ↓
1) Codes
P0183  Mod$00 ↓
Fuel Temperature