Actron PocketScan Plus CP9550 - Manual (Page 10)

10
NOTICE
The VIN function is not supported by all vehicles.
Troubleshooting
‰ If a “LINK ERROR” message appears while performing the
Read operation, cycle the ignition key to the OFF position
for 10 seconds, then back ON, then press the  READ key.
Make sure the ignition key is in the ON not the ACCESSORY
position.
‰ If a “LINK ERROR” message appears while performing the
Erase function, cycle the ignition key to the OFF position for
10 seconds, then back ON, then press one of the following
while the ignition key is in the ON not the ACCESSORY
position:
• To continue erasing, press the ERASE key. A Diagnostic
Trouble Code will return if the problem causing the
Diagnostic Trouble Code has not been fixed.
• To cancel the Erase function, and read codes, press the
 READ key.
• To cancel the Erase function and return to the Main Menu,
press the ENTER key.
‰ If the MIL Status is ON and the MIL is not illuminated with the
engine running, then a problem exists in the MIL circuit.