Activeforever Invacare SOLO2 Portable Oxygen Concentrator - Manual (Page 18)

SECTION 6—OPERATING INSTRUCTIONS
Invacare SOLO
2
™ 18 Part No 1156872
SECTION 6—OPERATING
INSTRUCTIONS
Location
ƽ WARNING
NEVER block the air opening of the product or place it on a
soft surface, such as a bed or couch, where the air opening may
be blocked. Keep the openings free from lint, hair and the like.
Keep unit at least 3 in (7.6 cm) away from walls, draperies,
furniture, and the like.
Locate and position the transportable oxygen concentrator in a well
ventilated space so that the air intake and the air exhausts are not
obstructed.
Recommendations for Optimal Performance
Filters
Air enters the transportable oxygen concentrator through an air intake filter
located on the left side of the unit. This filter prevents hair and other large
particles in the air from entering the unit. Before you operate the
transportable oxygen concentrator, make sure the filter is clean, dry and
properly positioned.
To clean/replace the air intake filter, refer to Cleaning, Care, And
Maintenance on page 32.
Operating Temperature: 41°F to 95°F (5°C to 35°C)
Relative Humidity: 15% to 60%
Transport/Storage Temperature: -2°F to 140°F (-20°C to 60°C)
Allow unit to warm, or cool, to operating
temperature range before using.
Electrical: No extension cords.
Altitude: Up to 10,000 ft (3046 m) above sea level.
Tubing and Cannula: 7 ft (2.1 m) crush resistant cannula
(DO NOT pinch).
Environment: Smoke, pollutant and fume free. No confined
spaces (example: no closets).
Time of Operation: Up to 24 hours per day when connected to AC or
DC power.