Acroprint 200 Clip-O-Matic User Manual

Page 4

We declare under our sole responsibility that the magnetic stripe and/or bar code reading and/or data

recording equipment Model 200 Clip-O-Matic Recorder to which this declaration relates are in conformity

with the following standards: EN 60950-1:1992. I, the undersigned, hereby declare that the equipment

specified above conforms to the above directive and standards.
Raleigh, North Carolina

USA

March 15, 1996

Michael W. Bolch

Acroprint Time Recorder Company

Maintenance

IMPORTANT: Empty the recorder's Chip Box at least once every month. When replacing the Chip Box

in the recorder, be sure that it is positioned far enough to the left to prevent a long time card from

hitting the side of the box (see figure 6).

To obtain the best results from your recorder, we recommend periodic inspection, cleaning, and oiling

throughout each year by an authorized dealer. For further information, contact your dealer or Acroprint

Time Recorder Co., 5640 Departure Dr., Raleigh, NC 27616, U.S.A. IN USA 800.334.7190

PART NO: 06-0105-000 REV: D

Figure 6

(front view with Case Cover removed)

Chip Box

I2 I 2

I0 II

C R O P R I

RALEIGH, N.C. USA

Declaration Of Conformity According To EMC Directive 73/23/EEC