ACR&Artex ResQMate - Manual (Page 7)

Y1-03-0240C 6
STEP TWO - HOW THE BEACON WORKS
1. How your beacon brings help
406 MHz beacons are a type of portable emergency equipment that
transmits a distress signal to search and rescue (SAR) organizations. The
purpose of these beacons is to aid SAR teams in tracking and locating
ships or individuals in jeopardy as rapidly as possible.
The 406 MHz frequency is a worldwide dedicated emergency frequency
that is detected by a special system of satellites called the Cospas-Sarsat
system. This satellite system was established by, and continues to be
supported by, its primary benefactors - the USA, Russia, Canada and
France. The Cospas-Sarsat system has saved over 24,500 lives - and
counting - since its inception. See Appendix G or the Cospas-Sarsat
website for more information about the system at
www.cospas-sarsat.org.
When a 406 MHz beacon is activated, the digital distress message is sent
to Cospas-Sarsat satellites and, in turn, the distress message is relayed to
SAR. The distress message contains important information about the
beacon and its owner. Additional information about the beacon is accessed
by SAR from the beacon registration database. At the same time the 406
MHz signal is activated, a 121.5 MHz signal is turned on. The 121.5 MHz
signal is used by SAR to home in on the beacon as they approach it.
The 406 MHz signal is detected by multiple satellites and from that
information the location of the beacon can be calculated. This data alone is
sufficient for SAR to find persons or ships in distress in a reasonable
timeframe.