Acnodes KDM 7198 - Manual (Page 36)

34
KDM-7190/8/16 series User’s Manual
4.10 Hotke
You can also conveniently command KVM switch by switching ports through
simple key sequences. The default hot key is SCROLL LOCK and the user
could change hot key as your convenient application. If you prefer to use some
hot key, please go to OSD menu and change the default hot key to the other.
To send commands to KVM switch, the SCROLL LOCK key must be pressed
twice within 2 seconds. You will hear a beep for confirmation and the keyboard is
in Hotkey mode. Then you have to enter Command in 2 seconds. If you have not
pressed any key during Hotkey mode over 2 seconds the Hotkey mode will
be escaped and back to Operation System control state.
A Command should be issued in Hotkey mode in 2 seconds.
Scroll
Lock
Scroll
Lock
Space Bar
Figure 4-10. Hotkey
Command Function
Space bar Active OSD
↑
Previous Channel
↓
Next Channel
[1.2,…,8] bank, First digit bank number start with 1
[01,02,…,16] port Second and third digits port number start with “01”
PgUp Previous bank
PgDn Next bank
“B” Turn on / off beeper
“S” Auto Scan
“U” Console Security “ON” to “OFF”
“P” User logout / login
“R” OSD setting back to factory default value
Table 4-4. Hotkey