Acnodes KDM 7198 - Manual (Page 32)

30
KDM-7190/8/16 series User’s Manual
4.7 Hardware Installation
Before installation, please make sure all of peripherals and computers have
been turned off.
4.7.1 Computer / Server Installation
Figure 4-6. Computer / Server Installation
3-in-1 HDDB-15 Cable Installation
Each computer port connector is HDDB-15 type. Inspect the 3-in-1 (PS/2
interface) or 2-in-1 (USB interface) DB15 cable. It will have a HDDB-15 male
connector at one end. Plug it into computer port on the rear of console. The other
end of input cable has three connectors (PS/2 interface) or two connectors (USB
interface): a HDDB-15 male type for computer video, a purple mini din 6-pin
PS/2 connector for keyboard and a green mini din 6-pin PS/2 connector for
mouse or one USB connector for keyboard and mouse. Plug these three
connectors (PS/2 interface) or two connectors (USB interface) into the
respective ports of computer. Repeat the same procedure for all other
computers.
a. PS/2 computer --- Plug PS/2 mouse connector to computer mouse port and
PS/2 keyboard connector to computer keyboard port. Do not hot plug PS/2 port.
If you must do that make sure PS/2 mouse first then the PS/2 keyboard.