Acnodes FES 8730 - Manual (Page 37)

3.2.12 Audio Connector
These two audio jacks ideal are for Audio Mic-In and Audio Line-out.
Pin Signal
1 Line Out
2 Microphone In
3.2.13 Ethernet Connector (LAN1, LAN2)
The RJ-45 connector is for Ethernet. To connect the board to a 1000/100/10 Base-T
hub, just plug one end of the cable into connector and connect the other end (phone
jack) to a 1000/100/10-Base-T hub
Pin Signal Pin Signal
L1 MDI0+ L5 MDI2-
L2 MDI0-
L6
MDI1-
L3 MDI1+ L7 MDI3+ A B
L4 MDI2+ L8 MDI3-
A Active LED (Yellow)
B 100 LAN LED (Green)/ 1000 LAN LED (Orange)
3.2.14 ATX Power On/OFF Button
The ATX power button is on the I/O side. It can allow users to control eBOX730-860-
FL power on/off.
Function Description
On Turn on/off system
Off Keep system status