Mpc 6172 – Acnodes MPC 6172B User Manual
Page 37
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6172
17” Medical Grade industrial Panel PC
Core 2 Duo fan less system
Load Fail-Safe Defaults
This option allows you to load the troubleshooting default values permanently stored in
the BIOS ROM. These default settings are non-optimal and disable all high-perfor-
mance features.
Load Optimized Defaults
This option allows you to load the default values to your system configuration. These
default settings are optimal and enable all high performance features.
Set Supervisor Password
These two options set the system password. Supervisor Password sets a password
that will be used to protect the system and Setup utility. User Password sets a
password that will be used exclusively on the system. To specify a password, high-
light the type you want and press
the screen. Type the password, up to eight characters in length, and press
The system confirms your password by asking you to type it again. After setting a
password, the screen automatically returns to the main screen.
To disable a password, just press the
password. A message will confirm the password to be disabled. Once the password
is disabled, the system will boot and you can enter Setup freely.
Save & Exit Setup
This option allows you to determine whether or not to accept the modifications. If you
type "Y", you will quit the setup utility and save all changes into the CMOS memory. If
you type "N", you will return to Setup utility.
Exit Without Saving
Select this option to exit the Setup utility without saving the changes you have made
in this session. Typing "Y" will quit the Setup utility without saving the modifications.
Typing "N" will return you to Setup utility.