Mpc 6172 – Acnodes MPC 6172B User Manual

Page 28

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MPC 6172

17” Medical Grade industrial Panel PC

Core 2 Duo fan less system

APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The default setting is Enabled.

MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version for your operating system. MPS
version 1.4 added extended configuration tables to improve support for multiple PCI bus configurations and
improve future expandability. The default setting is 1.4.

OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that
depends on certain BIOS calls to access memory. The default setting is Non-OS/2.

Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select
Enabled to release IRQ6. This is required to pass Windows
95/98's SCT test. You should also disable the Onboard FDC Controller in the Integrated Peripherals screen
when there's no floppy drive in the system. If you set this feature to Disabled, the BIOS will not report the
missing floppy drive to Win95/98.

Full screen Logo Show
The screen logo appears full of the monitor screen when the system is boot up. The default setting is
Enabled.

Small Logo (EPA) Show
The EPA logo appears at the right side of the monitor screen when the system is boot up. The default
setting is Disabled.

This manual is related to the following products:

PC 6172