Mpc 6172, Chapter 2 getting started, 1 system set up – Acnodes MPC 6172B User Manual

Page 15

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MPC 6172

17” Medical Grade industrial Panel PC

Core 2 Duo fan less system

CHAPTER 2 GETTING STARTED

2.1 SYSTEM SET UP

System Set Up

The following is a summary of the steps in setting up the system for use.

(1). You can fix the system to a mounting fixture using the screw holes on the sides of the system.

(2). Make any required external connections such as the display, keyboard, and LAN.

(3). Plug the appropriate end of the power cord into the power connector on the rear of the system and
the plug to an electrical outlet.

(4). Press the power switch on the front panel of the system once to turn on the system power.

(5). If necessary, run the BIOS SETUP programs to configure the system.

Caution:

In order to boot up system from USB-CD/DVD drive, please connect USB-CD/DVD drive, turn on
computer power, keep on pressing "F11" key, go into BIOS quick boot menu, select "USB-CD ROM",
WAIT FOR 20

SECONDS, then press enter, system OS will boot up from USB-CD/DVD drive directly.

This manual is related to the following products:

PC 6172