Acnodes FPC 5105 - Manual (Page 39)

3.6 Boot Menu
The Boot m enu allows users to change boot options of the s ystem.
 Boot Settings Configuration
 Setup Prompt Timeout
Use this item to set num ber of seconds to wait for setup activation key.
 Bootup NumLock State
Use this item to select the power-on state for the NumLock.. The optional settings are:
[On]; [Off].
 GateA20 Active
If Upon Request is selected, GA20 can be disabled using BIOS services. If Always is
selected, disabling G20 is not allowed; this option is useful when any RT code is
executed above 1MB.
 Option ROM Messages
Set display mode for option ROM. Configuration options are Force BIOS and Keep
Current.
 Interrupt 19 Capture
If this item is enabled, this function makes the option ROM to trap Interrupt 19.
 Boot Option Priorities
These are settings for boot priority. Specify the boot device priority sequence from the
available devices.