beautypg.com

Battery information, Care and maintenance – Acme BH-02 User Manual

Page 5

background image

5

EN

you want to transfer the call back to your BH02 press and hold the Answer/end

for 3 seconds till you hear a beep. release the button and the call is transferred

back to your BH02.

BAtterY InForMAtIon

Your device is powered by a rechargeable battery. the full performance of a

new battery is achieved only after two or three complete charge and discharge

cycles. the battery can be charged and discharged hundreds of times, but it

will eventually wear out. recharge your battery only with compatible chargers

designated for this device.

unplug the charger from the electrical plug and the device when not in use. do

not leave a fully charged battery connected to a charger, since overcharging may

shorten its lifetime. If left unused, a fully charged battery will lose its charge over

time.

never use any charger that is damaged.

leaving the device in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep

the battery between 15ºc and 25ºc (59℉ and 77℉). A device with a hot or cold

battery may not work temporarily, even when the battery is fully charged. Battery

performance is particularly limited in temperatures well below freezing.

do not dispose of batteries in a fire as they may explode. Batteries may also

explode if damaged. dispose of batteries according to local regulations. Please

recycle when possible. do not dispose as household waste

cAre And MAIntenAnce

Your device is a product of superior design and craftsmanship and should be

treated with care. the suggestions below will help you protect your warranty

coverage.

• Keep all accessories and enhancements out of the reach of small children.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture

can contain minerals that will corrode electronic circuits. If your device does get

wet, allow it to dry completely.

• do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• do not store the device in cold areas. when the device returns to its normal

temperature, moisture can form inside the device and damage electronic circuit

boards.

• do not drop, knock, or shake the device. rough handling can break internal

circuit boards and fine mechanics.

• do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• do not paint the device. Paint can clog the moving parts and prevent proper

operation.

All of the above suggestions apply equally to your device, battery, charger, or

any enhancement. If any device is not working properly, take it to the nearest

authorized service facility.