Acme BH-02 - Manual (Page 3)

3
EN
cHArge tHe BAtterY
this device has an internal, rechargeable battery. It connects the charger cable to
the headset.
1. connect the charger to a wall outlet. the red indicator light is displayed during
charging. If charging does not start, disconnect the charger, pug it again, and
retry. charging the battery fully may take up to 2 hours.
2. when the battery is fully charged, the red indicator light will turn blue.
disconnect the charger from the wall outlet and the headset.
the fully charged battery has power for up to 4 hours of talk-time or up to 200
hours of standby time. However, the talk and standby times may vary when used
with different mobile phones, products that use a Bluetooth connection, usage
settings, usage styles, and environments.
when the battery is running out of power, the red indicator light starts to flash.
swItcH tHe HeAdset on or oFF
to switch on, press and hold the Answer/end key for 3 seconds. the blue indicator
light starts to flash.
to switch off, press and hold the power key for 4 seconds until the red indicator
light is displayed briefly.
PAIr tHe HeAdset wItH A coMPAtIBle PHone
1. Make sure your headset is turn off
2. Push the answer/end key for 8 seconds until the blue and red light flashes
alternately
3. Activate the Bluetooth feature on the phone, and set the phone to search for
Bluetooth devices. see the user guide of your phone for instructions.
4. select the headset (BH02) from the list of found devices.
5. enter the password code 0000 to pair and connect the headset to your phone.
In some phones you may need to make the connection separately after
pairing. see the user guide of your phone for details. You only need to pair the
headset with your phone once.
6. If the pairing is successful, the headset’s blue light will flash 3 times briefly
for the first time follow by a single flash every 7 seconds. the headset’s name
appears in the phone menu where you can view the currently paired Bluetooth
devices.
dIsconnect tHe HeAdset FroM tHe PHone
to disconnect the headset from your phone (for example, to connect the phone to
another Bluetooth device) do one of the following:
• switch off the headset.
• disconnect the headset in the Bluetooth menu of your phone.
• Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
reconnect tHe PAIred HeAdset to Your PHone
to connect the headset to your phone, switch on the headset, make the connection
in the Bluetooth menu of your phone, or press and hold the Answer/end key.
You can set your phone to connect with the headset automatically when the
headset is switched on. see the user guide of your phone for details.