Yamaha DV-S5550 - Manual (Page 13)

9
English
Preparation
– Black level shift (NTSC output only)
Select On for adapting the color dynamics to
obtain richer contrasts.
– Monitor Type
Allows you to select the type of display device
that is connected to this unit.
In each device, a set of predefined Color settings
is available or choose Personal that allows you to
select the color settings according to your
preference.
– Video shift
Use this setting to personalize the position of
the picture on your TV by scrolling it to the left
or right.
– Color settings (Smart Color)
You can select one of four predefined sets of
color settings and one set (Personal) which you
can define yourself.
You can also switch the settings by accessing the
in the menu bar.
● When Personal is selected, it allows you to fine-
tune saturation, brightness and contrast.
● Use 3 or 4 to adjust the values of these
parameters.
– TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and
AUTO mode depending on your TV.
The conversions supported are as follows:
NTSC PAL 60 NTSC
Not
Supported
PAL PAL
NTSC PAL 60 NTSC
NTSC PAL PAL
Disc Output format
Type
NTSC
Format Selected mode
PAL
NTSC
PAL
NTSC PAL AUTO
DVD
VCD
Press 3 or 4 to select PAL, NTSC or AUTO.
Notes:
– AUTO can only be selected when using a TV
that has both the NTSC and PAL systems.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format is
most suitable for the best picture quality.