Yamaha DVD-S520 - Manual (Page 14)

10
Loading Discs
1 Press OPEN/CLOSE on the front of the player to open the
disc tray.
2 Load your chosen disc in the tray, label side up.
3 Press OPEN/CLOSE again to close the tray.
➜
reading appears in the status window and READING
on the player display, and playback starts automatically.
Note:
– If ‘Child Lock’ is set to ON and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc
must be authorized (see ‘Access Control’).
Playing a DVD Video and Video
CD
Playing a disc
¶ After inserting the disc and closing the
tray, playback starts automatically. The
status window of the player display shows
the type of disc loaded, as well as the
disc’s information and playing time.
¶ The disc may invite you to select an item from
a menu. If the selections are numbered, press
the appropriate numeric button; if not, use the
4
3 1 2 buttons to highlight your selection, then press
ENTER/OK.
¶ The number of the current title and chapter are displayed
on the player display.
¶ Playback may stop at the end of the Title and you may
return to the DVD disc menu.
¶ To stop playback, press 9.
➜ The default screen will appear, giving information about
the current status.
¶ You can resume playback from the point at which you
stopped playback. Press B; when you see the Resume icon
.
on the screen, press B again.
➜ The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RETURN/RESUME on the
remote control. Or, press B when you see the Resume
icon . on the screen, then press B again.
Note:
– DVDs may have a region code. The player will not play discs
that have a region code different from the region code of the
player.
General Features
Note:
– Unless stated, all operations described are based on remote
control use. Some operations can be carried out using the
menu bar on the screen.
Moving to another title/chapter
When a disc has more than one title or
chapter, you can move to another title/
chapter as follows:
¶ Press ON SCREEN, then select or in
the menu bar.
¶ Press 3 or 4 to select a title/chapter.
Slow Motion
¶ Select (SLOW MOTION) in the menu bar.
¶ Use the 4 buttons to enter the SLOW MOTION menu.
➜ Playback will pause.
¶ Use the cursor buttons 1 2 to select the required speed: -
1, -1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1
(forward).
¶ Select 1 or press B to play the disc at normal speed again.
¶ If ; is pressed, the speed will be set to zero (PAUSE).
¶ To exit slow motion mode, press 3.
(Playback continues at the selected speed.)
Still Picture and Frame-by-frame playback
¶ Select (STEP) in the menu bar.
¶ Use the 4 button to enter the step by
step menu.
➜ Playback will pause.
¶ Use the cursor buttons 1 2 to select the
previous or next picture frame.
¶ To exit step by step playback, press 3.
You can also step forward by pressing ; repeatedly on the
remote control.
¶ To resume playback, press B.
Scan
Scanning plays the first 10 seconds of each
chapter/track on the disc.
¶ Press SCAN.
¶ To continue playback at your chosen
chapter/track, press SCAN again or press B.
Note: This feature may not be available with some DVDs.
O
PERATION
Operation
ON SCREEN MENU
ENTER
OK
STOP PLAY PAUSE
AUDIO ZOOM ANGLE SUBTITLE
REPEAT — A–B SHUFFLE SCAN
OK
STOP PLAY PAUSE
AUDIO ZOOM ANGLE SUBTITLE
REPEAT — A–B SHUFFLE SCAN
STOP PLAY PAUSE