Accusplit A925MXTBL - Manual (Page 2)

TRIPLE MODE TIMER
The Timer can Count Down to Alarm,
Count Up to Alarm, or Count Down to
Alarm, and then Up. When you see a
small arrow or arrows in the lower left
hand corner of display, you are in Timer
mode. This is how the display looks in
Timer Mode.
Timer Set Instructions
S1 (2 sec) - Enter set function OR
S1 (4sec) - Enter set function & clear the
current settings
S2 select select field to be set (selected
field will flash)
S3 Set set field to desired settings
S4 exit exit setting function
Upon entering set function, you can
choose Count Down (#), Count Up ($),
or Count Down, then Up function ($#).
The next fields to be set are: Number of
Cycles to Repeat (not in Count Down-
Up), Hours, Tens of minutes, Minutes,
Tens of Seconds, Seconds, then repeat.
Note: Count Up Timer can be used as an
Event Stopwatch. Since 0:00:00 is inter-
preted as 30:00:00, Count Up Timer with
no time interval set will count up to 20
hours, as a time-out stopwatch.
Count Down or Count Up Timer
Operating Instructions
S2 - Start.
Top line of display shows number of
timing cycles to perform & number
of timing cycles preformed.
Middle line shows Time Interval for
each cycle.
Bottom line of display shows Time
Remaining (count down) or Elapsed
Time ( count up).
S2 - Stop. Display also shows “STOP”
S2 (2sec) - Reset to beginning
At end of every time interval, alarm
sounds for 5 seconds & timing cycle
repeats until stopped or cycle count
matches pre-programmed number of
cycles.
TIME OF DAY MODE
The watch keeps track of two complete
sets of time/day/date/alarm info (T1 and
T2). “T2” shows when the watch is in
Time-of-Day mode #2. This is how the
display looks in Time-of-Day Mode:
Setting the Time of Day, Day-Date,
and Alarms
Press ( repeatedly until you are in T1 or
T2, as desired.
S1 (2 sec) - Enter Set function
S2 - select select field to be set (field
will flash)
S3 - Set field to desired settings
Using Time of Day, Day, Date &
Alarm Functions
S3 - Alternates between Alarm & Day-
Date Display
Any button - Stops alarm sound
While in Alarm Display:
S2 - Changes Alarm & chime arm status:
Each press rotates through Alarm only
(display shows
1 ), Hourly chime
(display shows + ), or Both, then
neither.
Power Reset:
• Push and hold S2 and S3 - Display
turns OFF
• Release all - Display shows all
segments ON then displays stopwatch
at 0:00:00.00
Changing the Battery
When Low-Battery Indicator is “ON,”
replace the unit’s battery with a new Type
CR2016 Lithium cell, or equivalent.
REGISTER NOW.
Please return your A925MXTBL
registration to the Repair Center
address in the warranty, and
we will let you know about
future products.
PERFORMANCE SPECIFICATIONS
Stopwatch Performance Function
& Features
• 16 Dual Distance Split Automatic
Memory
• Hour, Minute, Second to 1/100 Sec
• 30 Hour Range
• Computers & Recalls Ave Lap Split
• Anytime Memory Review
• Rapid Memory Review
• FIFS (First In First Saved) Memory
• LIFO (last in First out) Memory
• Display True Split Count
• 1-Button Rapid Split & Reset Action
• Dual Split Timing
• Split Counter to 999 with Rollover
• Return to Running Dual Split
Timer Performance Function & Features
• Triple Mode Timer: Count Down to alarm,
• Count up to alarm, or Count down to
alarm, then count up.
• Start- stop 1/10 second stopwatch
• Auto Repeat of Count Down or Count Up
timer to pre-Programmed Cycle Count
• Displays preprogrammed Count Down,
up cycle count
• Display cycle completed
• 30 Hour Range (0:00:00=30:00:00)
• Hours, Minutes, Seconds Setting
• Hours, Minutes, Seconds, 1/10 Sec
Timing Display
Time of Day and Time of Day Alarm Func-
tions and Features
• Time Day-Month, Day, Alarm
• 2nd Time, Date-Month, Day, Alarm
• Hourly Chime
General Performance Features
• 5 year NO-PROOF OF PURCHASE
Warranty
• NO-FAIL, Million – Cycle Switches
• Bold, Easy-to-Read Digits
• 60 degree Comfort Viewing Angle
• Water Resistant
• Shock Resistant
• 32,768Hz Quarts Crystal accuracy
to +or- 0.01 sec/hr
• 1.5 Year Battery Life
• Low-Battery Indicator
• Accurate Temp: 5C-35C (41F-95F)
• Operating Temp: -10C0-60C (14F-140F)
980-300A Assembled in China. © ACCUSPLIT 2007
Email __________________________
User ___________________________
_______________________________
_______________________________
Number of
Cycles to
Repeat
Countdown
Interval
Number of
Cycles
Completed
so far
Remaining
Time for this
Interval
Watch is in
Countdown
Timer Mode
Month, Date,
and Day
Time
Indicates
Watch in Time-
of-Day Mode 2
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
See label on back of unit for details, or check
http://support.ACCUSPLIT.com