Accusys ExaSAN A12S2-PS - Manual (Page 24)

Quick Start Guide
P20
2.2 Array Configuration
In order to create an array, the RAID controller first needs to be added to the network.
Follow the steps below to add a controller in RAIDGuard X:
1. Click Add Controller to display a list of available controllers on the network. If the ExaSAN RAID system is used
as a DAS, the controller is displayed as “Local” under the IP field.
2. C l i c k o n t h e c o n t r o l l e r t o
administer, enter the password.
The default password for the
Accusys PCIe controllers is
00000000 (8 zeros).
3. Assign a name to the controller
and click Add.