Acclaim Lighting ART IO User Manual
Page 31
Time-code
The Art SSC can receive a time-code signal to trigger Actions, synchronise the Recorder or to convert to
other time-code protocols. It supports SMPTE, MTC, OSC and Art-net time-code signals, however, only
one protocol can be selected at a time. It is also possible to select 'Internal' as the time-code source; in
this case the internal timing logic of the Art SSC is used. Please see the following diagram.
By enabling the time-code outputs for MTC, OSC or Art-Net you create a time-code converter, or when
'Internal' is selected as input source, a time-code master.
30