Acclaim Lighting ART IO - Manual (Page 28)

Settings
In the Settings page you can change various properties of the Art SSC.
General
You can change the Art SSC's label. This label can be used to distinguish the unit in a set-up with
multiple Art SSCs.
The 'Blink' check-box will flash the device's LED to help to identify it amongst multiple devices.
This section also allows you to set the number of Memories in the Recorder. By default this number is
set to 16. If you would like to store only a few, but larger, recordings then you can lower this number;
making each memory bigger. All the recorder's memories need to be erased after changing this setting.
27