Candy TR 40 RUV - Manual (Page 35)

35
CLEANING
Before cleaning or removing the hob, it is imperative to :
. disconnect the hob from the mains supply,
. let all parts of the hob cool down.
Never use :
harsh abrasives, scouring pads or sharp objects to clean the hob.
• GENERAL MAINTENANCE
THE HOB
. Enamelled steel hob : when the hob has cooled completely, simply clean the enamelled
hob with soapy water, rinse and wipe with a clean dry cloth. If you clean the enamelled
hob when it is hot, you may tarnish it.
. Stainless steel : clean with soapy water, rinse and dry. You can use a special product to
clean stainless steel which is available from various retail outlets.
THE KNOBS -
Only clean with soapy water, rinse and dry well.
THE GAS BURNERS
For cleaning, it is recommended to remove all greasy or burnt deposits with ammonia
based products or usual cleaning products.
• The burner cap : it is simply placed on the burner.
Remove the pan support, the burner cap and clean it with a slightly soapy sponge. Rinse
and dry.
The enamelled steel burner cap : do not immerse it in cold water when it is hot, this will
prevent the enamel cracking as a result of thermal shock.
The brass finish burner cap : on using, the burner cap surface looses its brightness. For
current cleaning, it is recommended to remove all greasy or burnt deposits with ammoniacal
products or usual cleaning products. To recove brass brightness, use a special cleaning
product for copper, brass or bronze currently sold in stores. Do not use this specific product
for cleaning of the knobs.
• The burner body : regular cleaning will maintain the appliance original appearance.
Clean with a soapy sponge, rinse and dry. If the holes become clogged, brush the caps using
soapy water and dry with a clean cloth.
When re-assembling the burners, make sure that the burner caps and the burners
themselves are dry and after, seat them correctly.
Be careful not to let any water get into the burners.