Candy FO FDP 299 X - Manual (Page 10)

• The oven must be in Manual position (Auto symbol off): if not, press the button
“ “.
• Select a cooking method and the appropriate temperature.
The indicator lamps come on.
• Program a cooking period:
. Press the button “2”, then set a period with the buttons “-” and “+”.
• Program an end-of-cooking time:
. Press the button “3” then the button “+”: the programmer displays the current
time and the Auto symbol.
. Set an end-of-cooking time using the buttons “-” and “+” (current time +
maximum 24 hours).
The Auto symbol is steady. The symbol " " disappears. The current time is
displayed.
• The programmer calculates the cooking start time. It automatically starts the cooking
and then displays the symbol " ".
• At any time, you can view or change the programmed period (press the button
“2”), or the end time (press the button “3”).
• The oven stops automatically once the end-of-cooking time is reached.
The symbol " " disappears. The lighting in the oven and the indicator lamps
go off. An audible beep sounds as a warning. To interrupt it, press one of the
buttons “1”, “2”, “3” or “4”.
The “Auto” symbol blinks; to stop it, reset to Manual position by pressing the
button " ".
• Return the two selectors to the stop position.
PROGRAMMING THE LOWER OVEN
Programming the oven for a delayed start.