Candy PVU 647 X User Manual

Page 25

ENG

At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven
thermostat button to 0 position, pressing any button of the timer will end the audible warning.
Also, the timer will be brought to manual use function.

Semi- Automatic Programming According to Cooking Period :

This function is used to cook in the desired time range.

The foods to be cooked are put into the oven. The oven is adjusted to
the desired cooking function. The oven thermostat is adjusted to the
desired degree depending on the dish to be cooked.

Keep pressing on the MODE button until you see "stop" on the

timer screen. When you see "stop" on the timer screen, the symbol (A)
will begin to flash. Adjust the cooking period for the food you wish to cook,
by using the (+) and (-) keys while the timer is in this position. Some time
after the adjustment operation is completed, the day’s time will appear on
the screen and the symbols (A) and will begin to continuously light on
the screen. While doing this, the oven will also start to operate.

Semi-Automatic Programming According to Finishing Time :

This function is used to cook according to the desired finishing time.
The food to be cooked is put into the oven. The oven is adjusted to the
desired cooking function. The oven thermostat is adjusted to the desired
degree depending on the dish to be cooked.
Keep pressing on the MODE button until you see "end" on the timer
screen. When you see "end" on the timer screen, the symbol (A) and the
day’s time will respectively begin to flash.

MODE

Figure 14

MODE

Figure 15

A cooking period between the time range of 0 and 10 hours can be set.

Adjust the finishing time for the food you wish to cook, by using the (+) and (-) keys while the
timer is in this position. Some time after the adjustment operation is completed, the day’s time
will appear on the screen and the symbols (A) and will begin to continuously light on the
screen. While doing this, the oven will also start to operate.

You can set a time which can be up to 10 hours after the day’s time.

Audible Warning Time Adjustment is for warning purposes only. The oven will not
be activated at this function.

The audible warning time can be set to a time between the time range of 0 and 23.59.

When the time is up, the timer gives an audible warning and the symbol begins to flash
on the screen. Pressing any key will stop the audible warning and the symbol disappears
on the screen.