Changhong MRF-410 - Manual (Page 18)

18
EN
USE
SWITCHING ON
• Prior to the first use, thoroughly
clean the refrigerator with a soap
solution and rinse it well with plenty
of water, then wipe dry.
NOTE
Only wipe refrigerator’s electrical parts
with a dry cloth.
• Use the 1, “minus” and “plus” but-
tons to set the required tempera-
ture. This will start the compressor
and a bulb inside the refrigerator.
• Open the refrigerator after 30 min-
utes. If the refrigerator’s tempera-
ture is notably lower, the refrigera-
tor is operating properly. After the
refrigerator has been on for some
time, the temperature regulator will
automatically set the temperature
within prescribed limits.
ELECTRONIC PROGRAMMER
Logic control
Button 2, MENU
• This button is used to select func-
tions. Press the button to switch to
the next function. The preset order
is as follows: “set temperature in
the refrigerator”→”set temperature
in the freezer”→”set to “vacation”
mode→”switch off cooling”. Press
the button again to return to the first
function (“set temperature in the re-
frigerator”).
Buttons 1, +, -
• If a 2-digit number flashes on the
display, the 2 buttons can be used
to increase or decrease the value
by 1 unit each. This corresponds to
a temperature change of 1 degree
Centigrade.
2
1 3