Disc operations – JVC KW-AVX810 User Manual

Page 16

ENGLISH

Insert a disc.

Monitor panel closes automatically.
If not, press [Close].

Caution:

Do not place your finger behind the monitor panel.

Disc operations

The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).

If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.

If “

” appears on the screen, the unit cannot accept the operation you have tried to do.

• In some cases, without showing “

,” operations will not be accepted.

Open the monitor panel.

<Open/Tilt> menu is displayed.

• By pressing and holding the button, you can

open the monitor panel and eject the disc.

When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these multi-

channel sources. (☞ also page 67)

Caution on volume setting:

Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.

Label side

EN_KW-AVX810[EU]ff.indb 16

08.2.6 3:10:59 PM