JVC KV-PX701 - Manual (Page 15)

15
3. Bend the bracket support to a proper angle. Securely mount the vehicle
bracket to the windshield,
ensuring its base is resting
firmly on the dashboard.
4. Follow the directions, insert the bracket into
the slots on the bracket, and slide to fix
the set (A Æ B).
5. The in-vehicle bracket assembly is complete.
9 When using the in-vehicle secure
bracket, do not install it in a location
that will block the view of the driver
9 Recommended installation
requirements:
The bracket base should rest securely on
the dashboard to prevent excessive shock.
Using the Cigarette Lighter Adpator
While using the device in a vehicle, use
the included car charger for long periods
of usage.
1. Plug the small plug into the power
jack on the rear of the in-vehicle
bracket.
2. Insert the other end into the cigarette
lighter.
Note: Please note the directions of the
arrows. When secured, the assembly
should be tight. If these directions are
not followed, a loose fit will result, and
components must be reassembled.
ENGLISH