English 28 – JVC KD-R901 User Manual

Page 28

ENGLISH

Category Menu items

Selectable settings, [reference page]

Color

Ring Color

• On

• Off

: When a call comes in, the display will flash in blue.
• The display will change to the original color when you

answer the call or the incoming call stops.

When the unit receive a SMS, the display only illuminate

in blue.

: Cancels.

Audio

Fad/Bal

Fader/Balance

R6 – F6

L6 – R6

: Fad: Press

∞

to adjust the front and rear speaker

output balance. (Initial: 0)

: Bal: Press

to adjust the left and right

speaker output balance. (Initial: 0)

Loud
Loudness

• Loud1/Loud2/

Loud3

• Off

: Boost low and high frequencies to produce a

well-balanced sound at a low volume level.

: Cancels.

Volume Adjust

Level –5 —
Level +5
(Initial: Level 0)

: Preset the volume adjustment level of each source

(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.

• Before making an adjustment, select the source you

want to adjust.

• “FIX” appears on the display if “FM” is selected as the

source.

Subwoofer

• LPF/Level

• Phase

: Press

to select the cutoff frequency to

the subwoofer.

Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies higher

than 55 Hz/85 Hz/120 Hz are cut off.

Turn the control dial to adjust the subwoofer output level.
Level 00 to Level 08 (Initial: Level 04)
: Turn the control dial to select the subwoofer phase.
0deg (normal) or 180deg (reverse)

HPF
High pass filter

Select the cutoff frequency to the front/rear speakers. Set this to match the LPF
settings.

• 62Hz/95Hz/

135Hz

• Off

: Frequencies lower than 62 Hz/95 Hz/135 Hz are cut off.

: All signals are sent to the front/rear speakers.

Beep
Key touch tone

• On
• Off

: Activates the key touch tone.
: Deactivates the key touch tone.

Displayed only when USB Bluetooth Adapter (KS-UBT1) is connected.

If you are using a two-speaker system, set the fader level to <0>.

This adjustment will not affect the subwoofer output.

EN28-37_KD-R901_003A_3.indd 28

17/2/09 4:01:26 PM