Using the bluetooth mobile phone, Receiving a call, Ending a call – JVC KW-NSX700 User Manual
Page 55: Adjusting the volume of microphone, Switching between handsfree mode and phone mode, Notifying sms reception

55
ENGLISH
Receiving a call
When a call comes in...
Status of the device/Battery
reminder (only when the
information comes from the device)
Call information
(if acquired)
Rejects the call
• Phone operation is not available while the picture
from the rear view camera is displayed. (☞ page 45)
When
The unit answers the incoming call automatically.
(☞ page 59)
Ending a call
While talking...
Using the Bluetooth mobile phone
Adjusting the volume of
microphone
While talking...
• This adjustment does not affect the volume level of
the other sources.
• To adjust the volume of calls/earpiece, use VOLUME
–/+ (for KW-NSX700), or VOLUME/ATT knob (for KW-
NSX600) on the monitor panel.
Switching between handsfree mode
and phone mode
While talking...
Each time you press the button, the talking method is
switched (
: handsfree mode /
: phone
mode).
Notifying SMS reception
If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has been
received.
To read a received message, operate the mobile
phone after stopping the car in a safe place.
• You cannot read, edit, or send a message through
the unit.
• For some mobile phones, the notification message
may not be shown even if the SMS function is
supported.
EN_KW-NSX700/600[E].indb 55
EN_KW-NSX700/600[E].indb 55
12/11/14 13:02
12/11/14 13:02