JVC KW-NSX700 - Manual (Page 46)

46
ENGLISH
Setting menu items
• When changing settings for <Amplifier Gain>, <AV Input>, and <Input> in <Display Input> (with [AV]
selected for <Display>), turn off the AV source.* 1 Other settings can be changed when the AV source is turned
on.
Menu item Selectable setting/item Initial: Underlined
Audio
Fader/Balance Fader : Adjust the front and rear speaker output balance.
♦ F6 to R6; Initial 0
• When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.
♦ L6 to R6; Initial 0
Press [
5/∞/2/3 ] or drag [ ] to adjust.
• To clear the adjustment, press [Center].
Equalizer Change the sound mode or adjust and store the equalization for each source.
(☞ page 38)
♦ Flat/Natural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User
Loudness You can activate/deactivate loudness.
♦ On
♦ Off
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
: Cancels.
Crossover Adjust the crossover frequency. (☞ page 39)
Volume Adjust Adjust and store the auto-adjustment volume level for each source. (For
discs, the adjustment is stored for each of the following categories: DVD/
DVD-VR/VCD, CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume
level will automatically increase or decrease when you change the source.
♦ –15 to +06; Initial 00
• This setting is set to [00] when “Smartphone” is selected as the source
and the <Smartphone> setting is changed between [MHL] and
[MirrorLink].
Amplifier Gain * 2 ♦ On : Activates the built-in amplifier.
♦ Off : Deactivates the built-in amplifier.
Speaker Select Select the size of the connected speaker.
♦ Standard/Narrow/Middle/Wide
* 1 Only for KW-NSX700: Also turn off the rear source.
* 2 To change the setting, turn off the AV source by pressing [AV Off] on the <HOME> screen beforehand.
EN_KW-NSX700/600[E].indb 46 EN_KW-NSX700/600[E].indb 46 12/11/14 13:02 12/11/14 13:02