Simple troubleshooting – Siemens TK76009 User Manual
Page 45
41
de
en
Problem
Cause
Solution
Display shows
R
EFILL
BEAN
CONTAINER
although the bean container
15
is full, or the grinding unit
does not grind the beans.
Beans are not falling into
the grinding unit
(beans too oily).
Gently tap the bean
container 15.
Change the type of coffee if
necessary.
When the bean container 15
is empty, wipe it with a dry
cloth.
No hot water dispensed.
The milk frother 10 or its
holder is soiled.
Clean the milk frother 10 or
its holder.
Too little or no milk froth
or
The milk frother 10 does not
draw the milk in.
The milk frother 10 or its
holder is soiled.
Clean the milk frother 10 or
its holder.
Milk unsuitable for frothing.
Use low-fat milk (1.5 % fat).
The milk frother 10 is not
correctly assembled.
Assemble the milk frother 10
correctly.
Coffee dispensing slows to
a trickle.
Coffee is ground too finely.
Pre-ground coffee is too
fine.
Adjust the grinding unit to a
coarser setting. Use coarser
pre-ground coffee.
Build-up of limescale in the
appliance.
Descale the appliance.
Coffee has no “crema”.
Unsuitable type of coffee.
Change type of coffee used.
The beans are no longer
fresh.
Use fresh beans.
The grinding setting is not
suitable for the beans.
Adjust grinding setting to
fine.
Coffee is too “acidic”.
The grinding setting is too
coarse or the pre-ground
coffee is too coarse.
Adjust the grinding unit to a
finer setting or use finer pre-
ground coffee.
Unsuitable type of coffee
Use a darker roast.
Coffee is too “bitter”.
The grinding setting is too
fine or the pr
e-ground
coffee is too fine.
Adjust the grinding unit to a
coarser setting or use
coarser pre-ground coffee.
Unsuitable type of coffee.
Change type of coffee used.
Display shows
E
RROR
P
LEASE
CONTACT
HOTLINE
.
The appliance has a fault.
Please call the hotline.
If you are unable to solve the problem, always call the hotline.
Simple troubleshooting
SE_TK76_Teil_1_080917.indd 41
18.09.2008 08:40:50