Siemens TK76009 - Manual (Page 33)

29
de en
j
button and settings
Use the
j
button 7 to display information
(press briefly) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
how many drinks have been dispensed
since the espresso machine was switched
on
when should the next service be
completed.
● Press the
j
button 7 briefly and navigate
with the
<
and
>
buttons 4.
I
NFO
D ESCALE AFTER XXX CUPS
C
LEAN AFTER XXX CUPS
N
O FILTER
C
HANGE FILTER IN XXX CUPS
*
I
NFO
N
O
.
OF COFFEES XX
N O . OF MILK MIXES XX
A
M OUNT HOT WATER XL
*
appears only if the filter is activated.
Press the
j
button 7 again briefly to return
to drink selection. If no button is pressed for
about 10 seconds the appliance
automatically switches back to drink
selection mode.
Adjusting settings
(see “Menu settings”).
–
–
Adjusting the grinding unit
The rotary selector 17 adjusts the grind
settings from coarse to fine.
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged.
● While the grinding unit is running, adjust
the rotary selector 17 from fine • • • to
coarse ● ● ● as required.
Note: The new setting will not become
apparent until after the second cup of
coffee.
Tip: For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.
Cup warming
! Warning: The cup warmer 19
becomes very hot.
The fully automatic espresso machine has a
cup warmer 19 that can be switched on or
off manually with button 20. When the cup
warmer 19 is on, button 20 lights up.
Tip: For optimal cup warming, place the
base of the cups on the cup warmer 19.
TK76F09 only
The cup warming function can also be pre-
programmed (see “Menu settings CUP
WARMER ON”).
SE_TK76_Teil_1_080917.indd 29 18.09.2008 08:40:47