Siemens TK76009 - Manual (Page 34)

30
de en
Menu settings
● Hold the
j
button down for at least 3
seconds.
The different setting options are now
displayed
S
ETTINGS
L
ANGUAGE
E
NGLISH
W
ATER HARDNESS
D
ESCALE
In the following operating instructions, each
new setting begins with
j
3 sec. +
>
followed by an exact description.
The different setting options can be
selected with the
<
and
>
buttons 4.
S ETTINGS
W ATER HARDNESS
D ESCALE S TART
C LEAN
N.B.: The changes you have made are
saved automatically.
It is not necessary to confirm them
additionally.
j
3 sec. +
> L
ANGUAGE
● Turn the knob 6 to select the required
language
j
3 sec. +
> W ATER HARDNESS
● Turn the knob 6 to select the required
water hardness 1,2,3 or 4 .
Note: It is important to set the water
hardness correctly, so that the appliance
indicates accurately when the descaling
programme should be run. The factory
setting for the water hardness is
4 .
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
● Dip the test strip in the water briefly and
check the result after 1 minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4 1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
j
3 sec. +
> D
ESCALE
● If you want to descale the appliance,
press the start button 8 and run the
descaling programme (see “Descaling”).
j
3 sec. +
> C
LEAN
● If you want to clean the appliance, press
the start button 8 and run the cleaning
programme (see “Cleaning”).
j
3 sec. +
> C
ALC
‘
N
‘C
LEAN
● If you want to descale and clean the
appliance, press the start button 8 and
run the Calc‘n‘Clean programme (see
“Calc‘n‘Clean”).
SE_TK76_Teil_1_080917.indd 30 18.09.2008 08:40:47