System setup – HONDA 2012 Accord Navigation User Manual
Page 100

100 Navigation System
Accord 2D4D_KA 31TA5840
System Setup
Switching Display Mode Automatically
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see your Owner’s Manual for location of knob).
• On the SETUP Color adjustment screen, choose white for the map Day display and black for the map Night display (see page
Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
NOTE:
See your Owner’s Manual for additional information regarding the dash brightness adjustment.
llumination control
Priority Operation
But remember
Display Mode button
(see page
1
Allows selection of Day, Night, or Off display
mode. Press this button to display the
Brightness control. When the Brightness control
is displayed, pressing this button switches to the
Day, Night, or Off display mode.
This button has the highest priority for the
display control adjustments.
—
Dash illumination adjustment
knob (see your Owner’s
Manual for location)
2
When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
With the headlights on, adjust the dash
brightness back to mid-range to allow auto
switching by sensing the headlights are on or off.
Headlights (Auto/On/Off)
3
When turned on (or off), the display changes to
Night (or Day) display mode. By using
Display Mode button
, adjust brightness
Day/Night mode independently.
Use the
Display Mode button
, or with
the headlights on, adjust the dash illumination
to full bright to set the display to your desired
choice.
Map Day/Night screen color
choice (see page
for the
Day and Night color choices)
N/A
The user can select the color of the screen that
will be displayed for the Day and Night
display modes described above.
For best contrast, ensure that the map color is
white for Day and black for Night.
00_Accord 2D4D_KA.book 100 ページ 2011年7月21日 木曜日 午後1時59分
Intro
Index
Home
SEC
System Setup
2012 Accord