HONDA 2012 CR-Z - Manual (Page 261)

259
uu Replacing Light Bulbs u Headlight Bulbs
Main
tenan
ce
High voltage can remain in the circuit for a long period of time after the light is
switched off. Do not attempt to inspect or replace the high voltage discharge type
bulbs yourself. Ask a dealer to inspect and replace low beam headlights.
1. Remove the coupler.
u It can be removed by pushing the tab.
2. Rotate the old bulb to the left to remove.
3. Insert a new bulb into the headlight
assembly and turn it to the right.
4. Insert the coupler into the connector of the
bulb.
■ Low Beam Headlights (High Voltage Discharge Type) *
■ Low Beam Headlights (Halogen Headlights) *
Bulb
Coupler
Tab
* Not available on all models
12 CR-Z-31SZT610.book 259 ページ ２０１１年８月２９日 月曜日 午後８時８分