HONDA 2013 Accord Sedan - Manual (Page 93)

uu Gauges and Displays u Information Display *
92
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature indicator
Adjust the temperature reading up to ± 5°F or ± 3°C if the temperature reading
seems incorrect.
1. Turn the ignition switch to ON
( w *1 .
2. Press and hold the (Select/Reset) knob for 10 seconds or more while the
outside temperature is shown on the information display.
u The information display goes into temperature adjustment mode. The display
starts showing from -5°F to +5°F (U.S.) or -3°C to +3°C (Canada).
3. Release the knob when the right adjustment amount is shown.
u The adjustment is complete.
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your trips in the past.
■ Outside Temperature *
■
Range
1 Outside Temperature *
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
1 Adjusting the outside temperature indicator
Adjust the temperature reading up to ± 5°F or ± 3°C.
13 ACCORD 4D US-31T2A6000.book 92 ページ ２０１２年１０月３日 水曜日 午後４時２１分
Home
QRG
Index
2013 Accord Sedan
In
strum
e
nt Pa
nel
TOC
* Not available on all models *1 : Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.