2 inspecting and changing fuses p. 566, Inspecting and changing fuses – HONDA 2013 Accord Sedan User Manual
Page 567
566
uu
Fuses
u
Inspecting and Changing Fuses
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK
(
0
*1
. Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
to
There is a fuse puller on the back of the engine
compartment fuse box cover.
Combined
Fuse
Blown Fuse
Fuse Puller
13 ACCORD 4D US-31T2A6000.book 566 ページ ２０１２年１０月３日 水曜日 午後４時２１分
Home
QRG
Index
2013 Accord Sedan
Han
d
lin
g the U
n
expected
TOC
*1
:
Models
with
the
smart
entry
system
have
an
ENGINE START/STOP button instead of an ignition switch.