HONDA 2013 Accord Sedan User Manual
Page 79
78
uu
Indicators
u
Indicator
Name
On/Blinking
Explanation
Message
*1
Forward
Collision
Warning
(FCW)
Indicator
*
●
Comes on for a few seconds
when you change the power
mode to ON, then goes off.
●
Comes on when you have
customized FCW to turn off.
●
Comes on if there is a problem
with the FCW system.
●
Stays on constantly without FCW off - Have the vehicle
checked by a dealer.
●
Blinks when the system detects
a likely collision with a vehicle
in front of you. The beeper
sounds.
●
Blinks while driving - Take appropriate action to prevent
a collision (apply the brakes, change lanes, etc.).
—
—
●
Comes on when the FCW
system shuts itself off.
●
Stays on - The temperature inside the FCW system is too high.
The system activates when the temperature inside the system
cools down.
—
●
Stays on - The radar sensor or the area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in a safe place, and
wipe it off with a soft cloth.
●
Have your vehicle checked by a dealer if:
The indicator and message stay on after you cleaned the
radar sensor cover.
The indicator and message come back on after you cleaned
the area around the camera.
—
—
Models with information display
All models
Models with information display
Models with multi-information display
Models with information display
13 ACCORD 4D US-31T2A6000.book 78 ページ ２０１２年１０月３日 水曜日 午後４時２１分
Home
QRG
Index
2013 Accord Sedan
In
strum
e
nt Pa
nel
TOC
*
Not
available
on
all
models
*1
:
Models
with
the
smart
entry
system
have
an
ENGINE START/STOP button instead of an ignition switch.