HONDA 2013 Accord Sedan User Manual
Page 70
69
uu
Indicators
u
Continued
Indicator
Name
On/Blinking
Explanation
Message
*
Low Oil Pressure
Indicator
●
Comes on when you turn the
ignition switch to ON
(
w
*1
, and
goes off when the engine starts.
●
Comes on when the engine oil
pressure is low.
●
Comes on while driving - Immediately
stop in a safe place.
2 If the Low Oil Pressure Indicator
Malfunction
Indicator Lamp
●
Comes on when you turn the
ignition switch to ON
(
w
*1
, and
goes off either when the engine
starts or after several seconds if the
engine is not started. If “readiness
codes” have not been set, it blinks
five times before it goes off.
●
Comes on if there is a problem
with the emissions control system.
●
Blinks when a misfire in the
engine's cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 577
●
Comes on while driving - Have the
vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Charging System
Indicator
●
Comes on when you turn the
ignition switch to ON
(
w
*1
, and
goes off when the engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving - Turn off the
heating and cooling system
*
/climate
control system
*
and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Comes On P. 560
13 ACCORD 4D US-31T2A6000.book 69 ページ ２０１２年１０月３日 水曜日 午後４時２１分
Home
QRG
Index
2013 Accord Sedan
In
strum
e
nt Pa
nel
TOC
*
Not available on all models
*1
:
Models
with
the
smart
entry
system
have
an
ENGINE START/STOP button instead of an ignition switch.