Dot tire quality grading (u.s. vehicles) – HONDA 2012 Civic Hybrid User Manual
Page 258
257
uu
Checking and Maintaining Tires
u
DOT Tire Quality Grading (U.S. Vehicles)
Continued
Main
tenan
ce
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are
also graded for treadwear, traction, and temperature performance according
to Department of Transportation (DOT) standards. The following explains
explains these gradings.
Quality grades can be found where applicable on the tire sidewall between tread
shoulder and maximum section width.
The treadwear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one and one-half (1 1/2) times as
well on the government course as a tire graded 100. The relative performance
of tires depends upon the actual conditions of their use, however, and may
depart significantly from the norm due to variations in driving habits, service
practices and differences in road characteristics and climate.
■
Uniform Tire Quality Grading
■
Treadwear
1
Uniform Tire Quality Grading
For example:
Treadwear 200
Traction AA
Temperature A
All passenger car tires must conform
to Federal Safety Requirements in
addition to these grades.
CIVIC IMA_KAKC-31TR2600.book 257 ページ 2011年2月15日 火曜日 午前9時24分
2012 Civic Hybrid
TOC
Home
QRG
Index