2 checking the brake fluid p. 245, Brake fluid – HONDA 2012 Civic Hybrid User Manual
Page 246
245
uu
Maintenance Under the Hood
u
Brake Fluid
Main
tenan
ce
Brake Fluid
Check the fluid level several seconds after you
turn the ignition switch to ON
.
The fluid level should be between the MIN and
MAX marks on the side of the reservoir.
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
■
Checking the Brake Fluid
1
Brake Fluid
NOTICE
Brake fluid marked DOT 5 is not compatible with your
vehicle's braking system and can cause extensive
damage.
If the specified brake fluid is not available, you should
use only DOT 3 or DOT 4 fluid from a sealed
container as a temporary replacement.
Using any non-Honda brake fluid can cause corrosion
and decrease the longevity of the system. Have the
brake system flushed and refilled with Honda Heavy
Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark,
have a dealer inspect for leaks or worn brake pads as
soon as possible.
Brake Reservoir
MAX
MIN
II
CIVIC IMA_KAKC-31TR2600.book 245 ページ 2011年2月15日 火曜日 午前9時24分
2012 Civic Hybrid
TOC
Home
QRG
Index