P 251), Rear license plate light bulb, High-mount brake light bulbs – HONDA 2012 Civic Hybrid User Manual
Page 252
251
uu
Replacing Light Bulbs
u
Rear License Plate Light Bulb
Main
tenan
ce
Rear License Plate Light Bulb
When replacing, use the following bulb.
1. Remove the screw from the center of the
fastener using a Phillips-head screwdriver.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2 Back-Up Light and Rear Turn Signal
3. Remove the license plate light assembly by
squeezing the tabs on both sides of the
socket.
4. Remove the old bulb and insert a new bulb.
High-Mount Brake Light Bulbs
High-mount brake light bulbs are LED type. Have an authorized Honda dealer
inspect and replace the light bulbs.
Rear License Plate Light: 5 W
Lining
Clip
Fastener
Bulb
Socket
CIVIC IMA_KAKC-31TR2600.book 251 ページ ２０１１年２月１５日 火曜日 午前９時２４分
2012 Civic Hybrid
TOC
Home
QRG
Index