HONDA 2012 Civic Hybrid - Manual (Page 251)

250
uu Replacing Light Bulbs u Back-Up Light and Rear Turn Signal Light Bulbs
Main
tenan
ce
Back-Up Light and Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket to the left and remove it.
Remove the old bulb.
3. Insert a new bulb.
Brake/Taillight and Rear Side Maker Bulbs
Brake/rear taillight and rear side marker bulbs are LED type. Have an authorized
Honda dealer inspect and replace the light bulbs.
Back-Up Light: 21 W
Rear Turn Signal Light: 21 W (Amber)
1 Back-Up Light and Rear Turn Signal Light Bulbs
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it
Clip
Push until the
pin is flat
Lining
Clip
Bulb Socket
CIVIC IMA_KAKC-31TR2600.book 250 ページ ２０１１年２月１５日 火曜日 午前９時２４分
2012 Civic Hybrid
TOC
Home
QRG
Index
is flat.