HONDA 2012 CR-V - Manual (Page 314)

312
uu Replacing Light Bulbs u Front Turn Signal/Parking Light Bulbs
Main
tenan
ce
Front Turn Signal/Parking Light Bulbs
When replacing, use the following bulbs.
1. Turn the socket to the left and remove it.
2. Push in the old bulb, rotate to the left until
it unlocks, and remove.
3. Insert new bulb.
Brake Light, Taillight, Back-Up Light, Rear Turn
Signal Light and Lower Rear Side Marker Light Bulbs
When replacing, use the following bulbs.
1. Use a Phillip-head screwdriver to remove
the bolts.
2. Pull the light assembly out of the rear pillar.
Front Turn Signal/Parking: 24/2.2CP
Bulb Socket
Lower Rear Side Marker/Brake/Taillight: 21/5 W
Back-Up Light: 21 W
Rear Turn Signal Light: 21 W (Amber)
Bolts
CR-V-31T0A600.book 312 ページ ２０１１年８月８日 月曜日 午後６時２６分