HONDA 2012 CR-V - Manual (Page 111)

109
uu Locking and Unlocking the Doors u Customizing the Auto Door Locking/Unlocking Setting *
Co
ntrols
*1: Default setting
■ Customizing Flow for Auto Door Unlocking Options
Steps
Ignition Switch Unlock Mode Park Unlock Mode
Off
To unlock driver’s
door
To unlock all doors
To unlock driver’s
door *1
To unlock all doors
1
Apply the parking brake.
Move the shift lever out of
( P with the brake
pedal depressed.
Apply the parking brake.
Move the shift lever to
( P .
Apply the parking brake.
Move the shift lever to
( P .
2 The driver’s door must be closed at this stage. Open the driver’s door.
3 Turn the ignition switch to ON ( w . Turn the ignition switch to ON ( w .
4
Press and hold the rear of the master door lock switch on the driver’s door for more than five seconds. You will hear a click twice.
5 Release the switch.
Keep pressing the switch
for another five seconds
to hear one more click.
Release the switch.
Keep pressing the switch
for another five seconds
to hear one more click.
Release the switch.
6
Turn the ignition switch to ACCESSORY ( q within 20 seconds.
u Customization is completed.
CR-V-31T0A600.book 109 ページ ２０１１年８月８日 月曜日 午後６時２６分