Auto select (a.sel) p. 162, Radio data system (rds) – HONDA 2012 CR-V User Manual
Page 164

uu
Audio System Basic Operation
u
Playing the AM/FM Radio
162
Features
Use the auto select feature to scan both bands and store the strongest station in
each preset.
1. Press the SETUP button.
2. Press
to enter the auto select mode.
u
The system goes into scan mode for several seconds.
To turn off auto select, press
again. This restores the presets you originally set.
Provides text data information related to your selected RDS capable FM station.
■
RDS INFO ON
Press the SETUP button twice then press
while listening to an RDS capable
station. The station name is displayed. To turn off the RDS information, press
again.
■
To find an RDS station from your selected program category
1. Press the
/
button to display and
select an RDS category.
2. Use SEEK/SKIP or SCAN to select an RDS
station.
■
Auto Select (A.SEL)
■
Radio Data System (RDS)
1
The ST indicator appears on the display indicating
stereo FM broadcasts.
Stereo reproduction in AM is not available.
Switching the Audio Mode
Press the SOURCE button on the steering wheel.
2 Audio Remote Controls P. 209
You can store six AM stations and twelve FM stations
into the preset button memory. FM1 and FM2 let you
store six stations each.
A.SEL function scans and stores up to six AM stations
and twelve FM stations with a strong signal into the
preset button memory.
If you do not like the stations auto select has stored,
you can manually store your preferred frequencies.
1
The display shows up to 16 characters of text data.
RDS Category
CR-V-31T0A600.book 162 ページ 2011年8月8日 月曜日 午後6時26分