HONDA 2010 Pilot - Manual (Page 216)

If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described. Each preset button can
store one frequency on AM and two
frequencies on FM.
Select the desired band, AM or
FM. You can store one frequency
on FM1, and one frequency on FM
2 with each preset button.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Pick a preset button (1 6), and
hold it until you hear a beep.
Use the tune, skip, scan, or RDS
function to tune the radio to a
desired station.
Press the A. SEL button. You will see
A. SEL flashing in the display, and
the system goes into scan mode for
several seconds. It stores the
frequencies of six AM, and twelve
FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
, press the
A. SEL (auto select) button. This
restores the presets you originally
set.
For information on FM/AM radio
frequencies and reception, see page
.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
1.
2.
3.
4.
308
To turn off auto select
Preset AUTO SELECT
Playing the FM/AM Radio (LX model)
212
2010 Pilot